Skip to content
ROBOTICS & MECHATRONICS

Robotics & Mechatronics Engineering

VitroVentures supports industrial robotics integration and mechatronics engineering, end-of-arm tooling (EOAT), robot cell layouts, part presentation, and interfacing robots with PLC control. We combine mechanical, controls, and motion design so robotic cells work as a coordinated system.

Robotic cells are designed with appropriate guarding and a risk-assessment-informed layout. We do not assume that collaborative robots remove guarding or safety requirements, guarding is determined by the application and its risk assessment.

  • Rockwell, Siemens, Omron, SolidWorks, Inventor
  • P.Eng. support where required
  • Usually reply within one business day
  • On-site in Metro Vancouver & Fraser Valley

Capabilities

Robotic Integration

  • End-of-arm tooling (EOAT) design
  • Robot cell layout and reach studies
  • Robot-to-PLC I/O interfacing
  • Fixtures and part presentation

Mechatronics

  • Actuator and sensor selection support
  • Motion control and multi-axis coordination
  • Custom mechanism design

Safety-Conscious Design

  • Guarding and fencing layouts
  • Risk-assessment-informed cell design
  • Interlock and E-stop integration concepts

Deliverables

  1. 01Robot cell layouts and reach studies
  2. 02EOAT and fixture designs
  3. 03Robot-to-PLC I/O interface documentation
  4. 04Guarding and safety-integration concepts
Who it’s for

Who we help

Manufacturers and machine builders adding robots, motion or custom electronics to a machine. We combine mechanical design, controls and embedded electronics so the parts work together.

Problems we solve

  • A manual pick, place or palletizing task that needs a robot
  • Motion that must be coordinated across servos, drives and a robot
  • Custom tooling (EOAT) for a specific part or tray
  • A product that needs custom control electronics and firmware

In more detail

Robot cells

A robot cell is a combination of the robot, tooling, part presentation, guarding and controls. We look at the whole cell, so the robot is not waiting on parts and the cell fits the space and the operators.

End-of-arm tooling

Grippers and vacuum tooling are designed around the part or tray being handled, with attention to weight, reach, changeover and what happens when a part is missing or misplaced.

Motion control

Coordinated motion across servos, VFDs and robots is planned with the mechanical design, so speeds, accelerations and loads are known before parts are ordered.

Embedded electronics

For products that need their own controller, we design control boards and firmware, such as the Cortex-M3 board in our pallet shuttle project.

How a project works

From first contact to handover

  1. 01Define the taskParts, cycle requirements, reach, payload and safety needs.
  2. 02ConceptCell layout, robot or actuator selection and tooling concept.
  3. 03DesignMechanical design, electrical design and control architecture.
  4. 04Program & integrateRobot, PLC and safety logic integrated and tested.
  5. 05CommissionStartup, tuning, risk reduction review and training.

Timelines depend on scope and how complete the input information is. The quote includes a proposed schedule.

Industries

  • Packaging and palletizing
  • Material handling and warehousing
  • Food processing
  • Manufacturing automation

On-site and remote

We are based in Delta, BC. On-site work covers Delta, Surrey, Langley, Abbotsford, Burnaby, Richmond and the rest of Metro Vancouver and the Fraser Valley. Design, drafting and programming can also be done remotely for clients across BC and Canada.

Service areas

Questions

Do you integrate industrial robots into machines and cells?

Yes. We support robot cell layout, end-of-arm tooling (EOAT), part presentation, and interfacing robots with PLC control as a coordinated mechatronic system.

How is machine safety handled in robotic cells?

Guarding is determined by the application and its risk assessment. We design cells with appropriate guarding, interlocks, and E-stop integration, and do not assume collaborative robots remove guarding requirements.

How do you price a project?

Every project is quoted after we review your scope. The quote states what is included, the deliverables and the price. Send drawings, photos or a short description, and we will tell you what else we need to price it accurately.

Can you work with our in-house engineering team?

Yes. We can work as an extension of your team, taking on a sub-assembly, a drawing backlog, a control panel or a PLC program, and handing back files in your standards and templates.

Discuss Your Robotics Project

Planning a robotic cell, EOAT, or a mechatronic mechanism? Contact VitroVentures to discuss integration scope and requirements.

PREFER EMAIL?
  • Drawings, sketches or CAD (PDF, STEP, DWG)
  • What you need: design, controls, or both
  • Quantity, timeline and site location
info@vitroventures.ca
TALK TO AN ENGINEER +1 604 729 8623Mon to Fri, 8:00 AM to 5:00 PM PST
  • Rockwell, Siemens, Omron, SolidWorks, Inventor
  • P.Eng. support where required
  • Usually reply within one business day
  • On-site in Metro Vancouver & Fraser Valley

Delta, BC, Canada

Request a quote

Takes about a minute. Fields marked * are required.

Email or phone is required, so we can get back to you.

Drawings or files (optional)
Your details are used only to reply to this request. You can also email files to info@vitroventures.ca.